Monday, September 11, 2017

Raspberry - Remote Desktop via The Cloud (Real VNC)

Login via SSH

On your PC access the SD card with Raspbian installed:


create a file named ssh with no content:


this will signal the Raspberry Pi to start the SSH server.

Put the SD card on the raspberry and start it.

Start VNC Server

Now on the cli via SSH:

sudo raspi-config


7 Advanced Options

A5 Resolution

DTM Mode 16 1024x768 60 Hz 4:3


Interfacing Options

  Now it will install a bunch of packages

Install the Real VNC Client on a PC

Get the Real VNC Server here:


Access the Raspberry Pi via VNC

Get the Raspberry PI IP from you router or by connecting a HDMI screen to it:


authenticate using a local user and password (the default is: pi / raspberry)



Creating a Cloud Account



if it does not open a browser, click on this link:

now create an account, and login into to the above window.


hit next and you are done.

You can have up to 5 devices with this free account.

Logging in to the Cloud

Now logging in the window above with the created account:


and it will show all your devices. Now you can just click on a device and with no port forwarding it will access it via the Real VNC Cloud:


Thursday, August 3, 2017

IoT / Arduino - USB ESP8266 Programmer (CH340G Chip)


I recently bought this ESP8266 WiFi module (ie ESP-01) for my IOT project. This is a self contained chip and can be programmed to do the respective tasks. To ease out the task of programming, I bought this ESP-01 ESP8266 Programmer CH340G Chip USB WiFi Wireless UART GPIO0 Adapter.

Please read my tutorial series on IOT.


So lets get started !


Installing Drivers - Part 1

1.  This Programmer Adapter is build around CH340 chip which usually needs to install the following drivers on a computer.

  • Unzip the folder.
  • If you are running a 64Bit Windows: – run the SETUP_64.EXE installer.
  • If you are running a 32Bit Windows: – run the SETUP_32.EXE installer.

2. Connect the ESP-01 (as shown) to the programmer and plug it into the USB.


3. Install the Drivers


After restarting the PC, the device will be ready to go.



Setting Arduino Software - Part 2

1. Download the latest arduino Software.

2. We need to Install ESP board in Arduino Software

Open up Arduino, then go to the Preferences (File > Preferences).

Then, towards the bottom of the window, copy this URL into the “Additional Board Manager URLs” text box:


3.  Hit OK. Then navigate to the Board Manager by going to Tools > Boards > Boards Manager. There should be a couple new entries in addition to the standard Arduino boards. Look for esp8266. Click on that entry, then select Install.


4. The board definitions and tools for the ESP8266 include a whole new set of gcc, g++, and other reasonably large, compiled binaries, so it may take a few minutes to download and install (the archived file is ~170MB). Once the installation has completed, an Arduino-blue “INSTALLED” will appear next to the entry

5. Select the Generic ESP 8266 Module Board.


6. Set the Upload Speed and CPU Frequency.



7. Select the device port. (Device should be connected to the PC)


8. To test the ESP8266, open up serial monitor (Ctrl + Shift + M)


9. Set baud rate to : 115200 baud
    and Both NL & CR
    with AutoScroll

10. Type AT command in the serial monitor and click enter. If you see an OK message, you are good to go.

11. You can find the complete set of AT commands here.


Bonus :

Out of them, here are my noted ones.

AT                      // Test if AT system works correctly

AT+GMR           //Print firmware version

AT+CWMOD=3   //Wifi Mode
- 1 = Station mode (client)
- 2 = AP mode (host)
- 3 = AP + Station mode (Yes, ESP8266 has a dual mode!)

AT+CWLAP       // List of all available wifi 

ATE1  / ATE0       // Enable or Disable echo

AT+CWJAP=”my-test-wifi”,”1234test”    // Connect to a wifi

AT+CWQAP         //Disconnect from the wifi


Caution :

  • The ESP8266 chip requires 3.3V power supply voltage. It should not be powered with 5 volts like other arduino boards.
  • The I/O pins of ESP8266 communicate or input/output max 3.3V only. i.e. the pins are NOT 5V tolerant inputs.

Taken From:

Tuesday, April 18, 2017

Windows - Streaming to TVs (via DLNA)

Here I’ going to show you how to stream media (in this the example is video but it should be similar to other media)  and share files with a Smart TV.

Smart TVs support a standard protocol called DLNA that allows you to stream video and share files to stream, among other things. Normally TV brands give it another name like AllShare (Samsung).

Windows Media Player and Windows itself support DLNA, wich is very usefull in order to display you media in you TV.


Enable Streaming

The DLNA streaming on Windows is off by default, so we need to enable it, the easiest is from Windows Media Player, just go to: 


Turn on you TV and wait a bit (20s) after click on “Turn on media streaming”:


now just click OK (check that you TV is on the list and is allowed), additionally you can change you media library name and disallow devices in your network:


later on if you want to comeback to this menu to Allow or Disallow a device you can just go to Windows Media Player again:


An alternative to get to this menu without Windows Media Player is just to go to the Start Windows icone and type “Media streaming options”, and click on the icon with that name:



Stream From the PC to the TV

First put your files here:


now this video will be available on the Videos section in Windows Media Player, you can select it and cast the video to your TV.

The first time you do this a popup will show on your TV asking if you allow the PC to stream, just select OK, the next time the streaming will automatically.


when the streaming starts, it will show you the controlls and the progress bar:


and you should be seeing the video on you TV Smile.

The inconvenience with this is that you have to go to you PC to start the video and maintain the player window open (in the next topic we are going to see how to start videos from the TV).

By default TV you only have the pause control over the video, but you can enable all the controls (Back, Forward, Previous Video, Next Video) with this option:



Start Videos From The TV (or another PC)

At this point if you already can stream from the PC to the TV, what you don’t know is that when you enabled streaming in the above section you are also started sharing the files in the Video library (by default only the Video folder) on your PC via DLNA.

Now on the TV you can get the the Videos library’s folders that your PC is sharing.


In my TV (Samsung Smart TV) you can find the PC by pressing on the  “Sources” in the TV remote.

As you can see bellow your PC is represented by a media icon, which has you PC name plus the library name you gave when you enabled streaming.

ICONfor other brands it should be similar, but check you TV’s Manual.

When you click the icon you get something like this:


DLNA categorizes and organizes your media which is normally quite confusing.

The easiest way is to go into the right category in this case Videos, and then select “Folders” that shows you the actual folders that you shared instead of some confusing DLNA organization.


if you want more folders to show on the TV you can just add them to the library, like this:


as you can see on the TV you have de default Video folder and the My Movies folder that we have just added to the Videos library.


if you just want to watch the videos in another Windows PC instead of you TV (ex: your Laptop), on that PC you just need to go to “Network”:


click on the media device icon, which will open Windows Media Player with the remote library already added to it:


and push play


Hope this was helpful !!!!!!! Smile

Saturday, February 11, 2017

Linux/Raspberry - Web SSH Shell (No client needed)

You probably access you linux machines via SSH using a client like Putty.

With Shell In A Box, you get the same SSH access but without any client, you just use a browser that shows you the the SSH connection via HTTPS.

This might be usefull in some scenario, so I’m going to show you how to set up it bellow.

To install just type:

sudo apt-get install shellinabox

and that’s it once it finished installing, Shell In A Box is running, just go to you browser and enter this


and you should get this


now just login and that’s it.

If you want to change something (ex: the 4200 port) you just edit this file:

nano /etc/default/shellinabox

FILE: shellinabox

# Should shellinaboxd start automatically

# TCP port that shellinboxd's webserver listens on

# Parameters that are managed by the system and usually should not need
# changing:
# SHELLINABOX_DATADIR=/var/lib/shellinabox
# SHELLINABOX_USER=shellinabox

# Any optional arguments (e.g. extra service definitions).  Make sure
# that that argument is quoted.
#   Beeps are disabled because of reports of the VLC plugin crashing
#   Firefox on Linux/x86_64.

and do

 sudo service shellinabox restart

to load the new configuration.

Monday, February 6, 2017

Docker - Running Applications on Docker Containers

Docker is a “container” platform, which allows applications to be run in their own sandboxed world. These applications share resources, e.g. things like hard drive space or RAM, but otherwise can’t interfere with programs running on the host system. For corporate servers this means an attacker may not be able to use a compromised web server to get at the database holding customer data.

For the desktop user, it means the bleeding-edge app you’re trying out can’t accidentally delete all your cat’s selfies.


Pros and Cons of Using Docker

There are several good reasons to try out new programs via Docker, including the following:

  • They are safely isolated from your system, without the means to do damage in most cases.
  • Docker containers have a mechanism to keep them up-to-date, meaning it’s easy to make sure you have the latest and greatest versions.
  • You’re not installing anything on your “real” system, so you won’t run into conflicts with your “regular” versions on the application. You could, for example, run LibreOffice on your host system, but run OpenOffice in a container (you know, in case you don’t believe the project is shutting down).
  • Speaking of versions, you can even have multiple (but different) copies of the same version running on your machine at once. Try that with Word 2016!
  • Some Docker apps run their own minimized version of Linux. This means even if the app isn’t normally compatible with Mac or Windows it may still work for you within a Docker container. Try them out before you switch to Linux full time.
  • They’re easy to clean up. Don’t like the way things turned out? Just trash the container and create a new one.

On the other hand, there are some caveats to using applications this way:

  • As they operate in their own little world, they don’t have access to your files unless you give it to them. That means if you want to try the brand new version of LibreOffice via Docker, you may need to do some additional work to make your files accessible.
  • In general, Docker apps ship with everything they need to run, which often includes libraries that could be re-used with other programs. Some even ship with a full operating system behind them. So you may be doubling up on disk space usage.
  • They don’t provide convenient icons and other desktop-centric niceties. While we’ll show you a GUI you can use to download and run these Docker containers, they won’t show up in your main application launcher unless you create an entry by hand.
  • Like many things open source, it’s members of the community who have been creating these Docker applications from their upstream releases. This means your access to the latest version and/or any bugfixes is at the mercy of these peoples’ free time.


Installation and Usage

Getting things up and running involves three preliminary steps:

  1. First, get Docker installed and running on your system (including a graphical interface for it, if you want one).
  2. Next, find and download an image for the application you want to run. While you normally install an application, you get one (and only one) copy of it. Think of an image as a template for the application — you can create as many installs from this template as you like.
  3. Lastly, create one of those copies, called a container, and run it.

Let’s look at each of these in detail.



Most Linux distribution have Docker available in repositories for easy installation. In Ubuntu, the following command will get you what you need:

sudo apt-get install

You can confirm the system is running by confirming the “dockerd” daemon is running (you do know how to use ps, grep, and pipes, don’t you?): An A-Z of Linux - 40 Essential Commands You Should Know An A-Z of Linux - 40 Essential Commands You Should Know Linux is the oft-ignored third wheel to Windows and Mac. Yes, over the past decade, the open source operating system has gained a lot of traction, but it’s still a far cry from being considered... Read More

ps ax | grep dockerd

The Docker daemon will start up with your system automatically by default, but you can set that differently if you know how to adjust your systemd settings.

If you’re interested, you can also grab the Simple Docker UI Chrome app. Follow the instructions here to get things set up so you can connect to the Docker daemon on your machine.


Note: If you use Simple Docker UI, make sure you add yourself to the “docker” user group as described here. If you’re not part of this group, you won’t be able to use Docker commands from your normal (non-root) user account, the one with which you’ll be running Chrome and its apps, without using sudo all the time.


Finding and Installing Desktop Applications With Docker

Now that you’ve got a nice UI going, it’s time to find something to install. Your first stop should be the Hub, a repository of applications hosted by the docker project. Another straightforward way to find some interesting applications is to Google for them. In either case look for a “Launch Command” along the lines of the following:

docker run -it -v someoptions \

-e more options \

yet even more options...

Paste this into a terminal and it will download and launch the application for you.

You can also “pull” the application, then launch it yourself. If you’re using the Simple UI app, it can search Docker Hub automatically for your keyword.


Once you’ve found what you’re looking for, click its listing, then the Pull Image button in the pop-up dialog to download the image of the application.


Remember, an image is a “template” of sorts. Next you’ll need to create a container that uses your new image. Switch over to the Images tab. Clicking the Deploy Container button will create a new, runnable copy of your application.




Running Your New Docker Container

From the command line, you can view a list of all your docker containers with the command:

docker ps -a


This lists the containers with some of their stats — note the “NAMES” column to the far right. To restart one of your containers, pick the name of the container you want and issue the following:

docker start [containername]

Using the app, go the “Containers” screen, select the container you want, and click the “Start” button in the upper left of the screen. Your application will start in a new window on your desktop, just like a “normal” application.


Your application should open in a new window, just as if you had installed it normally. But remember, it exists in isolation from your other applications. This allows you to do some neat things, like run LibreOffice and OpenOffice in parallel (their dependencies usually conflict with one another):



Try Docker-ized Apps for Fun and Profit

Docker provides an easy way to get an app up and running so you can try it out, and an equally easy way to clean it from your system. Once you get through the initial set-up of Docker, a single run command is often all you need to download an image, create a container from it, and launch it on your desktop.


Taken From:

Tuesday, January 3, 2017

Finding Your Public IP with Telnet (CLI)

Her I’m going to show you a little trick off a way to get you public IP when you just have a command line interface.

This can be done in any equipment with telnet like a:

  • Router
  • Switch
  • Linux Server
  • etc


How To Do It – Site: Check IP

The webpage:

gives out you public IP on a Browser, so what we are going to do is to open the Web Page on the HTTP Port (Port 80), and get a response from the webpage with you Public IP.

This Web Page does not need you to send HTML to pretend that your telnet is a Web Browser (like the IP Echo Website bellow)

To do it:

telnet 80


telnet 80

if you don’t have DNS configured, and then do as soon as it connects press:

  • ENTER (one or two times)

and it will give you the output bellow.




How To Do It – Site: IP Echo 

The webpage:

gives out you public IP on a Browser, so what we are going to do is to open the Web Page on the HTTP Port (Port 80), and then send some HTML code to pretend that your telnet is a Web Browser to get the HTML response from the webpage with you Public IP.

To do it:

telnet 80


telnet 80

if you don’t have DNS configured, and then paste the following HTML code

GET / HTTP/1.1
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1)

and press Enter, and you get this:


rigth here you can see you IP.


See Public IP on a Browser

In both methods/sites if you want, you can see the IP in a more pretty way, just copy the HTML code the Web Page returned (this output is from the IP Echo site):


to a text file with the “.html” extension in the computer you are using, I named mine index.html


save it and double click in the index.html which will open on your default browser, and show the HTML you copied from the command line: